Bracelet adjustment
A complimentary strap adjustment tool is included with every watch.
Step 1
On the inside of the bracelet or strap, locate the small arrows on each removable link. These arrows indicate the direction in which the pins should be pushed out.
Step 2
Place the bracelet or strap into the adjustment tool, ensuring the pin is properly aligned with the tool’s tip. Align carefully with the hole to prevent bending the pin. Turn the tool clockwise until the pin is fully removed.
Place the bracelet or strap into the adjustment tool, ensuring the pin is properly aligned with the tool’s tip. Align carefully with the hole to prevent bending the pin. Turn the tool clockwise until the pin is fully removed.
Step 3
Once you’ve removed the desired number of links, reinsert the pin in the same direction it was originally pushed out. If the pin protrudes slightly, use the base of the tool to press it fully into place.
Once you’ve removed the desired number of links, reinsert the pin in the same direction it was originally pushed out. If the pin protrudes slightly, use the base of the tool to press it fully into place.
Step 4
Retain any removed links in a safe place for future adjustments or resizing.![]()
![]()
![]()
![]()
Retain any removed links in a safe place for future adjustments or resizing.